Common Office Printer Problems and How to Fix Them

· 4 min read · Office IT

Printer offline, jobs stuck, or streaky pages? Learn the most common office printer problems and the simple fixes to try before you call anyone for help.

Start with the boring checks

Printers have a reputation for acting up at the worst moment. Most of the time the cause is simple. Before you dig in, run through this short list.

  • Is the printer on, and does the screen show a normal ready message?
  • Is there an error light or message? Read it. It often names the exact problem.
  • Is the paper tray loaded and pushed all the way in?
  • Are the cables snug, or is the printer showing as connected to your Wi Fi?

If all of that looks fine, find your symptom below.

Problem: the printer says offline

This is the most common complaint. Offline usually means the computer cannot find the printer on the network, even though the printer looks fine.

  1. Restart the printer. Turn it off, wait ten seconds, and turn it on.
  2. Check the printer's screen or menu for its network status. If it lost its Wi Fi connection, reconnect it.
  3. Restart the computer that cannot print.
  4. In your computer's printer settings, make sure the right printer is chosen and that the setting to work offline is not ticked.

If the printer keeps dropping offline every few days, the usual culprit is a changing network address. A printer that gets a new address from the router each time can fall out of step with the computers. A technician can give it a fixed address so it stays put.

Problem: jobs are stuck in the queue

You press print, nothing comes out, and the job just sits there. One bad job can block everything behind it.

  1. Open the print queue from your printer settings.
  2. Cancel the stuck job. If it will not cancel, cancel all jobs.
  3. Restart the printer and try a small test page.

If the queue clogs again, the file itself may be the problem. Try printing a different document. A very large file or a damaged one can choke a printer that is low on memory.

Problem: paper jams

A jam is almost always about paper or dirt. Turn the printer off before you reach inside. Pull the paper out gently in the direction it travels, so you do not leave scraps behind. Torn bits left inside cause the next jam.

To stop repeat jams:

  • Do not overfill the tray.
  • Fan the stack of paper before loading it, and keep it flat.
  • Store paper in a dry place. Damp paper sticks together.
  • Use the paper size and type that the printer is set for.
  • Clean the rollers if the manual says how. Dust makes them slip.

Problem: streaks, faded print, or smudges

Lines or faded patches point to a supply or a dirty part. On an inkjet, run the cleaning cycle from the printer menu. On a laser printer, the toner cartridge may be low or the drum unit may be wearing out. Shake the toner cartridge gently side to side as the manual describes, which can bring back print for a short while.

If streaks stay after a new cartridge, the part that transfers the image may be worn. At that point the repair cost compared with a replacement is worth weighing.

Problem: it prints, but the wrong thing

Garbled text, extra blank pages, or a flood of strange symbols usually means a driver problem. A driver is the small piece of software that lets your computer talk to a specific printer. After a system update, the old driver can stop working well.

Remove the printer from your computer, then add it again. Download the current driver from the printer maker's own website, not from a search ad or a third party site. Fake driver sites are a known way to spread unwanted software.

Problem: scanning to email or a folder stopped

Scan to email and scan to a shared folder both depend on settings stored inside the printer. When the email password changes, or a computer is renamed, those settings quietly break.

If scanning stopped right after a password change, that is the first place to look. The printer needs the new password entered in its settings. Many email services also require special app passwords or newer sign in methods for devices like printers, so a technician may need to adjust how the printer connects.

Do not forget printer security

A printer is a small computer on your network. Change the default administrator password, which is often the same on every machine of that model. Install firmware updates from the maker when they are offered. Firmware is the printer's built in software. Keep guests off the same Wi Fi as your printer if you can.

Printers that store scanned pages on an internal drive can hold client information. Before you sell, return, or recycle one, find out how to wipe it.

When to stop and call for help

Try the steps above first. Call someone when you see any of these:

  • The same problem returns every few days.
  • Several people lose printing at once.
  • You see a burning smell, grinding noise, or error code that persists after a restart.
  • Scanning, faxing, or sharing settings need to be rebuilt.

A good tech will also tell you honestly when a printer has reached the end of its useful life.

If printer headaches are a regular part of your week, Archway Point can look at the whole setup in person. A free office walkthrough is an easy, low pressure way to start.

Keep reading

Need a hand with this?

We come to your office, look at what you have, and tell you in plain words what we find.

Book a free walkthrough