How to Fix Wi Fi Dead Spots in a Small Office

· 4 min read · Office IT

Wi Fi dead spots in a small office usually come from router placement, building materials, or one overloaded device, and most can be fixed in an afternoon.

Start by finding where the problem really is

Before you buy anything, get a clear picture of the problem. Many offices spend money on a new router when the old one was simply sitting in the wrong place.

Walk the office with a phone or laptop and note where the signal drops. Open a video or run a free speed test app in each room. Write down which rooms are fine, which are slow, and which lose the connection completely.

Also note when it happens. If a spot is fine in the morning and bad in the afternoon, the cause may be too many devices at once, not distance.

Why dead spots happen

Wi Fi is radio. The signal gets weaker as it travels, and some materials stop it faster than others.

  • Brick, concrete, and cinder block walls block a lot of signal.
  • Metal filing cabinets, elevators, and metal shelving reflect it.
  • Water absorbs it, so fish tanks and break room appliances can matter.
  • Microwave ovens and some cordless phones add interference on the 2.4 GHz band, one of the two common Wi Fi frequencies.

The 5 GHz band, the other common frequency, is usually faster but does not reach as far or pass through walls as well. Many routers use both at once, and your devices pick one.

Fix 1: Move the router

This is the cheapest fix and it works more often than people expect. Many routers live in a back closet or behind the front desk because that is where the internet line enters the building.

Try to place the router in a central spot, up off the floor, and out in the open. Keep it away from metal cabinets, thick walls, and the microwave. A shelf in a hallway is often better than a cabinet in the corner.

If the internet line only comes in at one end of the building, you can often run a cable from there to a better location. That is a job for someone comfortable pulling network cable, but it is a very common one.

Fix 2: Update and restart

Routers are small computers. Check that the router has its latest firmware, which is the built in software that runs it. Manufacturers release updates that fix bugs and security problems. Keep automatic updates on if the router offers them.

A restart can clear temporary glitches, but if you need to restart it every week, treat that as a sign that the router is aging or overloaded.

Fix 3: Check the channel and the band

Wi Fi networks share a limited number of channels. In a building with neighboring offices, many networks may be talking over each other. Most modern routers pick a channel automatically, but some get stuck on a crowded one.

Look in the router settings for a channel option. Auto is usually fine. If you have a dead spot close to the router, interference is a more likely cause than distance.

Fix 4: Add access points, not a bigger router

If the office is simply too large or too divided by walls for one router, add more sources of signal. There are three common ways.

  1. Wired access points. An access point is a device that broadcasts Wi Fi. Each one connects back to your network by a cable. This is the most reliable option and the standard choice for offices.
  2. A mesh Wi Fi system. Several units work together as one network. Mesh is easy to set up. It works best when the units can connect to each other with a strong signal, or by cable.
  3. A range extender. This repeats an existing signal. It is cheap, but it often cuts speed in half or worse for the devices that use it. Use it only as a last resort.

Whichever you choose, give all the access points the same network name and password so devices can move between them without dropping off.

Fix 5: Wire what does not need to be wireless

Desktop computers, printers, and phones that stay in one place work better on a network cable. Every device you move off Wi Fi frees up room for the laptops and phones that need it.

If you have network jacks in the walls that were never connected, check them. Someone may have wired the office years ago.

Keep guests off your main network

While you are in the router settings, set up a separate guest network for visitors and personal phones. It keeps your computers, printers, and shared files away from devices you do not manage. Use a strong, unique password on the main network, and never leave the router on its default admin login.

When to call for help

If you have moved the router, updated it, and still have trouble, or if the office has several floors, thick walls, or a lot of devices, a proper layout plan helps. Someone who walks the space can place access points where they are needed instead of guessing.

That is part of what we do for small offices in St. Charles County. Learn more about our on site IT support.

If Wi Fi has been a headache and you would like a second set of eyes, you are welcome to book a free office walkthrough. No pressure, and no obligation to do anything afterward.

Keep reading

Need a hand with this?

We come to your office, look at what you have, and tell you in plain words what we find.

Book a free walkthrough